If the issue is unresolved, try replacing the HDMI cable.
NOTE: This normally resolves playback issues with MPEG2 PS files.
Turn the Blu-ray Disc player off and on again.
Depending on the audio input available on the TV, use either a digital (optical or coaxial) or red & white analog cable. IMPORTANT: Since DVI inputs only support video signals, another cable type must be used to get the audio to the TV.
If using a HDMI-to-DVI adapter or cable, connect a different cable to support the audio signal.
Set the speaker output to AV AMP when using a BRAVIA television.
PANASONIC HDMI TO MAC NO SOUND TV
If you have a video cable connected, in addition to the HDMI cable, then the TV may be set to the wrong video input.
Ensure the picture displayed on TV is from the Blu-ray Disc player and that the TV is set to the appropriate HDMI video input.
If you are using UBP-X800 or UBP-X700 please also check the following FAQ: No sound is heard when using the HDMI connection from the Blu-ray Disc player.įollow the steps below to troubleshoot this issue:.
If model-specific information is required to complete any of the steps in this solution, refer to the operating instructions supplied with the product.
You are trying to play a MPEG2 Program Stream (PS) file.
The TV may not be set to the appropriate HDMI video input.
The connection uses a HDMI-to-DVI cable.
The connection uses a HDMI-to-DVI adapter.
The following may be reasons for not hearing any sound or audio when using a HDMI connection to connect a Blu-ray Disc player to the TV.
0 kommentar(er)
